Base class for shapes that decorate another shape with extra functionality (e.g. scale, translation etc.) More...

#include <DecoratedShape.h>

Inheritance diagram for DecoratedShape:

Public Member Functions
JPH_OVERRIDE_NEW_DELETE	DecoratedShape (EShapeSubType inSubType)
	Constructor. More...

	DecoratedShape (EShapeSubType inSubType, const Shape *inInnerShape)

	DecoratedShape (EShapeSubType inSubType, const DecoratedShapeSettings &inSettings, ShapeResult &outResult)

const Shape *	GetInnerShape () const
	Access to the decorated inner shape. More...

virtual bool	MustBeStatic () const override
	Check if this shape can only be used to create a static body or if it can also be dynamic/kinematic. More...

virtual Vec3	GetCenterOfMass () const override
	All shapes are centered around their center of mass. This function returns the center of mass position that needs to be applied to transform the shape to where it was created. More...

virtual uint	GetSubShapeIDBitsRecursive () const override
	Get the max number of sub shape ID bits that are needed to be able to address any leaf shape in this shape. Used mainly for checking that it is smaller or equal than SubShapeID::MaxBits. More...

virtual const Shape *	GetLeafShape (const SubShapeID &inSubShapeID, SubShapeID &outRemainder) const override

virtual const PhysicsMaterial *	GetMaterial (const SubShapeID &inSubShapeID) const override
	Get the material assigned to a particular sub shape ID. More...

virtual void	GetSupportingFace (const SubShapeID &inSubShapeID, Vec3Arg inDirection, Vec3Arg inScale, Mat44Arg inCenterOfMassTransform, SupportingFace &outVertices) const override

virtual uint64	GetSubShapeUserData (const SubShapeID &inSubShapeID) const override
	Get the user data of a particular sub shape ID. Corresponds with the value stored in Shape::GetUserData of the leaf shape pointed to by inSubShapeID. More...

virtual void	SaveSubShapeState (ShapeList &outSubShapes) const override
	Outputs the shape references that this shape has to outSubShapes. More...

virtual void	RestoreSubShapeState (const ShapeRefC *inSubShapes, uint inNumShapes) override
	Restore the shape references after calling sRestoreFromBinaryState. Note that the exact same shapes need to be provided in the same order as returned by SaveSubShapeState. More...

virtual Stats	GetStatsRecursive (VisitedShapes &ioVisitedShapes) const override
	Volume of this shape (m^3). Note that for compound shapes the volume may be incorrect since child shapes can overlap which is not accounted for. More...

virtual bool	IsValidScale (Vec3Arg inScale) const override

virtual Vec3	MakeScaleValid (Vec3Arg inScale) const override

Public Member Functions inherited from Shape
	Shape (EShapeType inType, EShapeSubType inSubType)
	Constructor. More...

	Shape (EShapeType inType, EShapeSubType inSubType, const ShapeSettings &inSettings, ShapeResult &outResult)

virtual	~Shape ()=default
	Destructor. More...

EShapeType	GetType () const
	Get type. More...

EShapeSubType	GetSubType () const

uint64	GetUserData () const
	User data (to be used freely by the application) More...

void	SetUserData (uint64 inUserData)

virtual bool	MustBeStatic () const
	Check if this shape can only be used to create a static body or if it can also be dynamic/kinematic. More...

virtual Vec3	GetCenterOfMass () const
	All shapes are centered around their center of mass. This function returns the center of mass position that needs to be applied to transform the shape to where it was created. More...

virtual AABox	GetLocalBounds () const =0
	Get local bounding box including convex radius, this box is centered around the center of mass rather than the world transform. More...

virtual uint	GetSubShapeIDBitsRecursive () const =0
	Get the max number of sub shape ID bits that are needed to be able to address any leaf shape in this shape. Used mainly for checking that it is smaller or equal than SubShapeID::MaxBits. More...

virtual AABox	GetWorldSpaceBounds (Mat44Arg inCenterOfMassTransform, Vec3Arg inScale) const

AABox	GetWorldSpaceBounds (DMat44Arg inCenterOfMassTransform, Vec3Arg inScale) const
	Get world space bounds including convex radius. More...

virtual float	GetInnerRadius () const =0

virtual MassProperties	GetMassProperties () const =0
	Calculate the mass and inertia of this shape. More...

virtual const Shape *	GetLeafShape (const SubShapeID &inSubShapeID, SubShapeID &outRemainder) const

virtual const PhysicsMaterial *	GetMaterial (const SubShapeID &inSubShapeID) const =0
	Get the material assigned to a particular sub shape ID. More...

virtual Vec3	GetSurfaceNormal (const SubShapeID &inSubShapeID, Vec3Arg inLocalSurfacePosition) const =0

virtual void	GetSupportingFace (const SubShapeID &inSubShapeID, Vec3Arg inDirection, Vec3Arg inScale, Mat44Arg inCenterOfMassTransform, SupportingFace &outVertices) const

virtual uint64	GetSubShapeUserData (const SubShapeID &inSubShapeID) const
	Get the user data of a particular sub shape ID. Corresponds with the value stored in Shape::GetUserData of the leaf shape pointed to by inSubShapeID. More...

virtual TransformedShape	GetSubShapeTransformedShape (const SubShapeID &inSubShapeID, Vec3Arg inPositionCOM, QuatArg inRotation, Vec3Arg inScale, SubShapeID &outRemainder) const

virtual void	GetSubmergedVolume (Mat44Arg inCenterOfMassTransform, Vec3Arg inScale, const Plane &inSurface, float &outTotalVolume, float &outSubmergedVolume, Vec3 &outCenterOfBuoyancy, RVec3Arg inBaseOffset) const =0

virtual void	Draw (DebugRenderer *inRenderer, RMat44Arg inCenterOfMassTransform, Vec3Arg inScale, ColorArg inColor, bool inUseMaterialColors, bool inDrawWireframe) const =0
	Draw the shape at a particular location with a particular color (debugging purposes) More...

virtual void	DrawGetSupportFunction (DebugRenderer *inRenderer, RMat44Arg inCenterOfMassTransform, Vec3Arg inScale, ColorArg inColor, bool inDrawSupportDirection) const
	Draw the results of the GetSupportFunction with the convex radius added back on to show any errors introduced by this process (only relevant for convex shapes) More...

virtual void	DrawGetSupportingFace (DebugRenderer *inRenderer, RMat44Arg inCenterOfMassTransform, Vec3Arg inScale) const
	Draw the results of the GetSupportingFace function to show any errors introduced by this process (only relevant for convex shapes) More...

virtual bool	CastRay (const RayCast &inRay, const SubShapeIDCreator &inSubShapeIDCreator, RayCastResult &ioHit) const =0

virtual void	CastRay (const RayCast &inRay, const RayCastSettings &inRayCastSettings, const SubShapeIDCreator &inSubShapeIDCreator, CastRayCollector &ioCollector, const ShapeFilter &inShapeFilter={ }) const =0

virtual void	CollidePoint (Vec3Arg inPoint, const SubShapeIDCreator &inSubShapeIDCreator, CollidePointCollector &ioCollector, const ShapeFilter &inShapeFilter={ }) const =0

virtual void	CollideSoftBodyVertices (Mat44Arg inCenterOfMassTransform, Vec3Arg inScale, const CollideSoftBodyVertexIterator &inVertices, uint inNumVertices, int inCollidingShapeIndex) const =0

virtual void	CollectTransformedShapes (const AABox &inBox, Vec3Arg inPositionCOM, QuatArg inRotation, Vec3Arg inScale, const SubShapeIDCreator &inSubShapeIDCreator, TransformedShapeCollector &ioCollector, const ShapeFilter &inShapeFilter) const

virtual void	TransformShape (Mat44Arg inCenterOfMassTransform, TransformedShapeCollector &ioCollector) const

ShapeResult	ScaleShape (Vec3Arg inScale) const

virtual void	GetTrianglesStart (GetTrianglesContext &ioContext, const AABox &inBox, Vec3Arg inPositionCOM, QuatArg inRotation, Vec3Arg inScale) const =0

virtual int	GetTrianglesNext (GetTrianglesContext &ioContext, int inMaxTrianglesRequested, Float3 outTriangleVertices, const PhysicsMaterial *outMaterials=nullptr) const =0

virtual Stats	GetStats () const =0
	Get stats of this shape. Use for logging / data collection purposes only. Does not add values from child shapes, use GetStatsRecursive for this. More...

virtual Stats	GetStatsRecursive (VisitedShapes &ioVisitedShapes) const
	Volume of this shape (m^3). Note that for compound shapes the volume may be incorrect since child shapes can overlap which is not accounted for. More...

virtual float	GetVolume () const =0

virtual bool	IsValidScale (Vec3Arg inScale) const

virtual Vec3	MakeScaleValid (Vec3Arg inScale) const

virtual void	SaveBinaryState (StreamOut &inStream) const
	Saves the contents of the shape in binary form to inStream. More...

virtual void	SaveMaterialState (PhysicsMaterialList &outMaterials) const
	Outputs the material references that this shape has to outMaterials. More...

virtual void	RestoreMaterialState (const PhysicsMaterialRefC *inMaterials, uint inNumMaterials)
	Restore the material references after calling sRestoreFromBinaryState. Note that the exact same materials need to be provided in the same order as returned by SaveMaterialState. More...

void	SaveWithChildren (StreamOut &inStream, ShapeToIDMap &ioShapeMap, MaterialToIDMap &ioMaterialMap) const
	Save this shape, all its children and its materials. Pass in an empty map in ioShapeMap / ioMaterialMap or reuse the same map while saving multiple shapes to the same stream in order to avoid writing duplicates. More...

Public Member Functions inherited from RefTarget< Shape >
	RefTarget ()=default
	Constructor. More...

	RefTarget (const RefTarget &)

	~RefTarget ()
	assert no one is referencing us More...

void	SetEmbedded () const

RefTarget &	operator= (const RefTarget &)
	Assignment operator. More...

uint32	GetRefCount () const
	Get current refcount of this object. More...

void	AddRef () const
	Add or release a reference to this object. More...

void	Release () const

Public Member Functions inherited from NonCopyable
	NonCopyable ()=default

	NonCopyable (const NonCopyable &)=delete

void	operator= (const NonCopyable &)=delete

Protected Attributes
RefConst< Shape >	mInnerShape

Protected Attributes inherited from RefTarget< Shape >
atomic< uint32 >	mRefCount
	Current reference count. More...

Additional Inherited Members
Public Types inherited from Shape
using	ShapeResult = ShapeSettings::ShapeResult

using	SupportingFace = StaticArray< Vec3, 32 >
	Type definition for a supporting face. More...

using	VisitedShapes = UnorderedSet< const Shape * >

using	ShapeToIDMap = StreamUtils::ObjectToIDMap< Shape >

using	IDToShapeMap = StreamUtils::IDToObjectMap< Shape >

using	MaterialToIDMap = StreamUtils::ObjectToIDMap< PhysicsMaterial >

using	IDToMaterialMap = StreamUtils::IDToObjectMap< PhysicsMaterial >

Static Public Member Functions inherited from Shape
static ShapeResult	sRestoreFromBinaryState (StreamIn &inStream)
	Creates a Shape of the correct type and restores its contents from the binary stream inStream. More...

static ShapeResult	sRestoreWithChildren (StreamIn &inStream, IDToShapeMap &ioShapeMap, IDToMaterialMap &ioMaterialMap)
	Restore a shape, all its children and materials. Pass in an empty map in ioShapeMap / ioMaterialMap or reuse the same map while reading multiple shapes from the same stream in order to restore duplicates. More...

Static Public Member Functions inherited from RefTarget< Shape >
static int	sInternalGetRefCountOffset ()
	INTERNAL HELPER FUNCTION USED BY SERIALIZATION. More...

Static Public Attributes inherited from Shape
static constexpr int	cGetTrianglesMinTrianglesRequested = 32
	This is the minimum amount of triangles that should be requested through GetTrianglesNext. More...

static bool	sDrawSubmergedVolumes = false
	Debug helper which draws the intersection between water and the shapes, the center of buoyancy and the submerged volume. More...

Protected Member Functions inherited from Shape
virtual void	RestoreBinaryState (StreamIn &inStream)
	This function should not be called directly, it is used by sRestoreFromBinaryState. More...

Static Protected Member Functions inherited from Shape
static void	sCollidePointUsingRayCast (const Shape &inShape, Vec3Arg inPoint, const SubShapeIDCreator &inSubShapeIDCreator, CollidePointCollector &ioCollector, const ShapeFilter &inShapeFilter)
	A fallback version of CollidePoint that uses a ray cast and counts the number of hits to determine if the point is inside the shape. Odd number of hits means inside, even number of hits means outside. More...

Static Protected Attributes inherited from RefTarget< Shape >
static constexpr uint32	cEmbedded
	A large value that gets added to the refcount to mark the object as embedded. More...

Detailed Description

Base class for shapes that decorate another shape with extra functionality (e.g. scale, translation etc.)

Constructor & Destructor Documentation

◆ DecoratedShape() [1/3]

JPH_OVERRIDE_NEW_DELETE DecoratedShape::DecoratedShape ( EShapeSubType inSubType )

inlineexplicit

Constructor.

◆ DecoratedShape() [2/3]

DecoratedShape::DecoratedShape	(	EShapeSubType	inSubType,
		const Shape *	inInnerShape
	)

inline

◆ DecoratedShape() [3/3]

DecoratedShape::DecoratedShape	(	EShapeSubType	inSubType,
		const DecoratedShapeSettings &	inSettings,
		ShapeResult &	outResult
	)

Member Function Documentation

◆ GetCenterOfMass()

virtual Vec3 DecoratedShape::GetCenterOfMass ( ) const

inlineoverridevirtual

All shapes are centered around their center of mass. This function returns the center of mass position that needs to be applied to transform the shape to where it was created.

Reimplemented from Shape.

Reimplemented in OffsetCenterOfMassShape, RotatedTranslatedShape, and ScaledShape.

◆ GetInnerShape()

const Shape * DecoratedShape::GetInnerShape ( ) const

inline

Access to the decorated inner shape.

◆ GetLeafShape()

virtual const Shape * DecoratedShape::GetLeafShape	(	const SubShapeID &	inSubShapeID,
		SubShapeID &	outRemainder
	)		const

inlineoverridevirtual

Get the leaf shape for a particular sub shape ID.

Parameters

inSubShapeID	The full sub shape ID that indicates the path to the leaf shape
outRemainder	What remains of the sub shape ID after removing the path to the leaf shape (could e.g. refer to a triangle within a MeshShape)

Returns: The shape or null if the sub shape ID is invalid

Reimplemented from Shape.

◆ GetMaterial()

const PhysicsMaterial * DecoratedShape::GetMaterial ( const SubShapeID & inSubShapeID ) const

overridevirtual

Get the material assigned to a particular sub shape ID.

Implements Shape.

◆ GetStatsRecursive()

Shape::Stats DecoratedShape::GetStatsRecursive ( VisitedShapes & ioVisitedShapes ) const

overridevirtual

Volume of this shape (m^3). Note that for compound shapes the volume may be incorrect since child shapes can overlap which is not accounted for.

Get the combined stats of this shape and its children.

Parameters

ioVisitedShapes is used to track which shapes have already been visited, to avoid calculating the wrong memory size.

Reimplemented from Shape.

◆ GetSubShapeIDBitsRecursive()

virtual uint DecoratedShape::GetSubShapeIDBitsRecursive ( ) const

inlineoverridevirtual

Get the max number of sub shape ID bits that are needed to be able to address any leaf shape in this shape. Used mainly for checking that it is smaller or equal than SubShapeID::MaxBits.

Implements Shape.

◆ GetSubShapeUserData()

uint64 DecoratedShape::GetSubShapeUserData ( const SubShapeID & inSubShapeID ) const

overridevirtual

Get the user data of a particular sub shape ID. Corresponds with the value stored in Shape::GetUserData of the leaf shape pointed to by inSubShapeID.

Reimplemented from Shape.

◆ GetSupportingFace()

void DecoratedShape::GetSupportingFace	(	const SubShapeID &	inSubShapeID,
		Vec3Arg	inDirection,
		Vec3Arg	inScale,
		Mat44Arg	inCenterOfMassTransform,
		SupportingFace &	outVertices
	)		const

overridevirtual

Get the vertices of the face that faces inDirection the most (includes any convex radius). Note that this function can only return faces of convex shapes or triangles, which is why a sub shape ID to get to that leaf must be provided.

Parameters

inSubShapeID	Sub shape ID of target shape
inDirection	Direction that the face should be facing (in local space to this shape)
inCenterOfMassTransform	Transform to transform outVertices with
inScale	Scale in local space of the shape (scales relative to its center of mass)
outVertices	Resulting face. The returned face can be empty if the shape doesn't have polygons to return (e.g. because it's a sphere). The face will be returned in world space.

Reimplemented from Shape.

Reimplemented in OffsetCenterOfMassShape, RotatedTranslatedShape, and ScaledShape.

◆ IsValidScale()

virtual bool DecoratedShape::IsValidScale ( Vec3Arg inScale ) const

inlineoverridevirtual

Test if inScale is a valid scale for this shape. Some shapes can only be scaled uniformly, compound shapes cannot handle shapes being rotated and scaled (this would cause shearing), scale can never be zero. When the scale is invalid, the function will return false.

Here's a list of supported scales:

SphereShape: Scale must be uniform (signs of scale are ignored).
BoxShape: Any scale supported (signs of scale are ignored).
TriangleShape: Any scale supported when convex radius is zero, otherwise only uniform scale supported.
CapsuleShape: Scale must be uniform (signs of scale are ignored).
TaperedCapsuleShape: Scale must be uniform (sign of Y scale can be used to flip the capsule).
CylinderShape: Scale must be uniform in XZ plane, Y can scale independently (signs of scale are ignored).
RotatedTranslatedShape: Scale must not cause shear in the child shape.
CompoundShape: Scale must not cause shear in any of the child shapes.

Reimplemented from Shape.

Reimplemented in RotatedTranslatedShape, and ScaledShape.

◆ MakeScaleValid()

virtual Vec3 DecoratedShape::MakeScaleValid ( Vec3Arg inScale ) const

inlineoverridevirtual

This function will make sure that if you wrap this shape in a ScaledShape that the scale is valid. Note that this involves discarding components of the scale that are invalid, so the resulting scaled shape may be different than the requested scale. Compare the return value of this function with the scale you passed in to detect major inconsistencies and possibly warn the user.

Parameters

inScale Local space scale for this shape.

Returns: Scale that can be used to wrap this shape in a ScaledShape. IsValidScale will return true for this scale.

Reimplemented from Shape.

Reimplemented in RotatedTranslatedShape, and ScaledShape.

◆ MustBeStatic()

virtual bool DecoratedShape::MustBeStatic ( ) const

inlineoverridevirtual

Check if this shape can only be used to create a static body or if it can also be dynamic/kinematic.

Reimplemented from Shape.

◆ RestoreSubShapeState()

void DecoratedShape::RestoreSubShapeState	(	const ShapeRefC *	inSubShapes,
		uint	inNumShapes
	)

overridevirtual

Restore the shape references after calling sRestoreFromBinaryState. Note that the exact same shapes need to be provided in the same order as returned by SaveSubShapeState.

Reimplemented from Shape.

◆ SaveSubShapeState()

void DecoratedShape::SaveSubShapeState ( ShapeList & outSubShapes ) const

overridevirtual

Outputs the shape references that this shape has to outSubShapes.

Reimplemented from Shape.

Member Data Documentation

◆ mInnerShape

RefConst<Shape> DecoratedShape::mInnerShape

protected

The documentation for this class was generated from the following files:

Jolt/Physics/Collision/Shape/DecoratedShape.h
Jolt/Physics/Collision/Shape/DecoratedShape.cpp

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ DecoratedShape() [1/3]

◆ DecoratedShape() [2/3]

◆ DecoratedShape() [3/3]

Member Function Documentation

◆ GetCenterOfMass()

◆ GetInnerShape()

◆ GetLeafShape()

◆ GetMaterial()

◆ GetStatsRecursive()

◆ GetSubShapeIDBitsRecursive()

◆ GetSubShapeUserData()

◆ GetSupportingFace()

◆ IsValidScale()

◆ MakeScaleValid()

◆ MustBeStatic()

◆ RestoreSubShapeState()

◆ SaveSubShapeState()

Member Data Documentation

◆ mInnerShape